Table of Contents
Advertisement
2.1.5 Install the cable tie and mount
You can install the bundled cable tie and mount which may be used to
organize your cables.
To install the cable tie and mount to your Embedded computer:
1.
Remove the two (2) rubber plugs from the holes reserved for the cable
tie and mount from your Embedded computer.
2.
Insert the cable tie into the cable mount, then install the cable tie and
mount to your Embedded computer.
3.
You can organize the cables using the cable mount.
4.
You can adjust the position of the cable mount by lifting the tab
securing the mount to the tie upwards then sliding the cable mount
along the cable tie while the tab is lifted. When you have adjusted the
cable mount to a preferred position, let go of the tab.
5.
You can adjust the tightness of the cable mount cable holder by lifting
the tab and tightening or loosening the cable mount cable holder.
PV100A Series
23
Advertisement
Table of Contents
