Download Print this page

Asus Pundit P1-PH1 Quick Installation Manual

Barebone system.
Hide thumbs
   

Advertisement

Pundit P1-PH1
Barebone System
Quick Installation Guide
E 2 3 4 7
E 2 3 4 7
E 2 3 4 7
E 2 3 4 7
E 2 3 4 7

Advertisement

   Also See for Asus Pundit P1-PH1

   Related Manuals for Asus Pundit P1-PH1

   Summary of Contents for Asus Pundit P1-PH1

  • Page 1

    E 2 3 4 7 E 2 3 4 7 E 2 3 4 7 E 2 3 4 7 E 2 3 4 7 Pundit P1-PH1 Barebone System Quick Installation Guide...

  • Page 2: Front Panel Features

    Front panel features C l o s e C l o s e O p e n O p e n C l o s e C l o s e C l o s e O p e n O p e n O p e n O p t i c a l d r i v e...

  • Page 3: Internal Components

    4 4 4 4 4 8 8 8 8 8 7 7 7 7 7 6 6 6 6 6 5.25-inch optical drive and ASUS motherboard 3.5 inch hard disk drive cage DIMM sockets Front panel cover LGA775 socket (under the CPU...

  • Page 4: Removing The Front Panel Cover

    Removing the front panel cover Lift the front panel cover 1 1 1 1 1 2 2 2 2 2 hooks outward. Carefully remove the front panel cover, then set it aside. Removing the storage drive assembly Lay the system on its side, Lift the storage drive then locate and remove three assembly, then set aside.

  • Page 5: Installing The Cpu

    Installing the CPU Unlock the load lever, then lift Lift the load plate, then to a 90º-100º angle. remove the PnP cap. R e t e n t i o n t a b R e t e n t i o n t a b R e t e n t i o n t a b R e t e n t i o n t a b R e t e n t i o n t a b...

  • Page 6: Installing An Expansion Card

    Installing an expansion card Lift the PCI riser card Remove the metal cover assembly to remove. opposite the slot that you intend to use. Insert the card connector to Reinstall the PCI riser card the slot, then press the card assembly.

  • Page 7: Reinstalling The Storage Drive Assembly

    Reinstalling the storage drive assembly Before reinstalling the storage drive assembly, connect the IDE and power plugs to the IDE and power connectors at the back of the drives. Connect the black plug of the IDE cable to the optical drive, then the gray plug to the hard disk drive.

  • Page 8: Reinstalling The Cover

    Reinstalling the front panel cover Insert the front panel cover 1 1 1 1 1 2 2 2 2 2 tabs to the holes at the right side of the chassis, then close. Insert the front panel cover hooks to the chassis tabs until the front panel cover fits in place.

Comments to this Manuals

Symbols: 0
Latest comments: