Hitachi BD-W80PAE Operating & Installation Instructions Manual page 26

Front loading washing machine
Table of Contents

Advertisement

How to Install the Washing Machine
How to Install the Washing Machine
Connecting the
Connecting the
power
power
Level Adjustment
Level Adjustment
26
26
3WPL079591-2
3WPL079591-2
Connect the washing machine to an alternating current via a correctly
Connect the washing machine to an alternating current via a correctly
installed earthed socket only.
installed earthed socket only.
The mains voltage must correspond to the voltage specifi cation on the
The mains voltage must correspond to the voltage specifi cation on the
washing machine.
washing machine.
Connection specifi cations as well as the required fuses are stipulated
Connection specifi cations as well as the required fuses are stipulated
on the washing machine nameplate.
on the washing machine nameplate.
Do not plug the washing machine into an extension lead or power strip
Do not plug the washing machine into an extension lead or power strip
with multiple sockets.
with multiple sockets.
All four adjustable feet must be fi rmly on the ground. The washing
All four adjustable feet must be fi rmly on the ground. The washing
machine must not wobble.
machine must not wobble.
Check the alignment of the washing machine with a spirit level, and
Check the alignment of the washing machine with a spirit level, and
adjust the feet if it's not aligned.
adjust the feet if it's not aligned.
1
1
Loosening
Loosening
Elevating
Elevating
Tightening
Tightening
Lock nut
Lock nut
Plastic base plate
Plastic base plate
Loosen the lock nut by
Loosen the lock nut by
Lock nut
Lock nut
unscrewing in the arrow
unscrewing in the arrow
direction
direction
Adjustable leg
Adjustable leg
the unit with the adjustable
the unit with the adjustable
feet.
feet.
After adjustment, tighten
After adjustment, tighten
2
2
the lock nut by screwing it
the lock nut by screwing it
in the arrow direction
in the arrow direction
Tighten the lock nut until it
Tighten the lock nut until it
reaches the plastic base plate.
reaches the plastic base plate.
Adjustable leg is not over 25 mm.
Adjustable leg is not over 25 mm.
1
1
then stabilize
then stabilize
2
2
.
.

Advertisement

Table of Contents
loading

Table of Contents