Lcd Wired Remote Controller - Midea MTIU-07HWFNX-QRD0W Technical Manual

3.2

LCD Wired Remote Controller

3.2.1 LCD Wired Remote Controller KJR-12B/DP(T) (Standard)
The KJR-12B/DP(T) wired remote controller is standard for Duct type.
i) Buttons and Functions
MODE BUTTON
• Used to select the operating mode
• For cooling-only units, there is no
HEAT function.
TIMER ON BUTTON
• Used to automatically
turn on the air conditioner
at a specif ied time.
TIMER OFF BUTTON
• Used to automatically
turn off the air condi-
tioner at a specif ied
time.
FOLLOW ME BUTTON
• Allows the remote
control to act as a remote
thermostat and relay
temperature information
from its current location.
AUXILIARY ELECTRICAL HEATER
• The Auxiliary Electric Heater
warms up the unit in cold
climates.
• If pressed during HEAT mode,
the electric heater function
becomes ineffective.
ii) LCD Screen
AUTO COOL DRY HEAT FAN
TIME R
ON
TIME R
OFF
RESET BUTTON
• Used to restore the system
to its default settings.
Operation mode
Displays the selected
operating mode
1
Timer
The "ON" sign lights up
when the TIMER ON
function is activated
The "OFF" sign lights up
when the TIMER OFF
function is activated
ON/OFF BUTTON
• Used to start/stop the air
conditioner.
ADJUST BUTTON
• Press these two buttons
at the same time to switch
between Celsius and
Fahrenheit (some models)
SWING BUTTON
• The SWING button starts
and stops the louver
movement and sets the
desired airflow direction.
ECONOMY BUTTON
• Used to activate/deacti-
FOLLOW
ECO
ME
vate ECONOMY Mode, in
AUXI L
HEATER MODE FANS PEED SWING TEMP which the unit maintains
a comfortable tempera-
ture during sleeping hours.
RESET LOCK
F AN SPEED BUTTON
• Used to select the
fan speed.
LOCK BUTTON
• Used to lock/unlock
the current setting.
Follow me
Displayed when the
FOLLOW ME feature
is activated
2
1 1 12 12
Lock
Displayed when the LOCK
mode is on
Temperature display
Displays the current set
temperature
High
Lo wM ed .
ON/OFF
Displayed when
the air
conditioner is
on
Fan speed
Displays the
selected fan
speed
 Page 91 