3. Using the application
This chapter explains how to connect the application to a Makita product and configure the product's settings.
3-1. Connecting a Makita Product
Connect the Makita product to the PC to change the product settings.
First, insert the battery into the product.
Refer to the User's Manual for the location of the USB terminal.
Product
Battery
USB port cover
Note! Make sure the battery is fully charged, or close to fully charged.
Next, use the supplied USB cable to connect the Makita product to the PC (when the application is not
running).
When the product is connected, the LED indicator will flash yellow, and you can proceed to the next step.
LED indicator
USB cable
Note! Please connect the product after installing the application on your PC.
26