Advanced Settings - Bahco TASMB Series Original Instructions Manual

TASMB AND TAWMB SERIES
STD

ADVANCED SETTINGS

Advanced settings are accessed from SETTINGS menu selection on main menu.
1. From target torque or angle screen, press and hold ENTER button for 3 seconds.
2. Highlight SETTINGS menu selection using UP/DOWN buttons.
3. Press ENTER button to display Settings menu.
Menu Selections:
EXIT - Exits Settings menu and returns to target screen.
SHOW INFO - Displays tool operational information.
SLEEP TIME - Displays power down interval setup screen.
LCD CONTRAST - Displays LCD contrast setup screen.
KEY BEEP - Displays button press beep enable/disable setup screen.
TARGET BEEP - Displays target beep enable/disable setup screen (only on SLIM & SCR).
AUTO BACKLIGHT - Displays auto backlight enable/disable screen to turn on backlight during measurement.
TOGGLE BACKLGHT - Displays BACKLIGHT button toggle or timeout enable/disable screen.
BATTERY TYPE - Displays the battery type selection screen (only on SLIM & SCR).
PAIRING MODE – Displays wireless radio pairing mode selection screen.
4. To exit Settings menu and return to target torque or angle screen, press ENTER button while EXIT menu
selection is highlighted.
STD
SLIM/SCR
SLIM/SCR