Advertisement
Quick Links
INSTALLATION GUIDE
TS53, TM67, and TL75 Drum Mower Lift Kit
● Safely lift or place the mower in a position where you can access the bottom skid
plate and prepare for removal and installation.
● Inspect the factory skid plate for any excess damage that may impede safe
installation and operation.
● Remove the 6x 12mm bolts located on the bottom of each skid plate. The skid
plate is heavy, so be careful and have preventative measures in place for the
supporting of the skid plate as it is being removed and separated from the drum
unit.
● Once the factory skid plate has been removed, place the new longer bolts in
through the bottom of the new skid plate (Fig.1) and use tape to hold them in
place (Fig.2). This will make the installation hassle free in the next steps. Then
place the skid plate on the ground with the bolt threads facing up.
(Fig.1)
2021-1.0
(Fig.2)
IBEX EQUIPMENT CO
Advertisement
Related Manuals for IBEX TS53
Summary of Contents for IBEX TS53
- Page 1 INSTALLATION GUIDE TS53, TM67, and TL75 Drum Mower Lift Kit ● Safely lift or place the mower in a position where you can access the bottom skid plate and prepare for removal and installation. ● Inspect the factory skid plate for any excess damage that may impede safe installation and operation.
- Page 2 ● Now line up the holes with the bolts and place the factory/old skid plate on top of the shims, where the bolts go through the factory holes and the old plate will be resting on top of the shims. 2021-1.0 IBEX EQUIPMENT CO...
- Page 3 This step is best done with a helper to help with the heavy plates. ● Place the mower back on the ground and the installation of the lift kit has been successfully completed. 2021-1.0 IBEX EQUIPMENT CO...