Silvercrest GML807 User Manual And Service Information page 11

Gaming Laser Mouse GML807
Proceed as follows:
Open the compartment on the underside of the mouse by
turning the cover 90 degrees anticlockwise.
Remove the weights holder.
Remove the desired number of ballast weights from the holder.
Use a pointed object (e.g. a pencil) to slide the desired weight
out of the holder.
Replace the holder into the compartment and then replace the
cover. To do this, place the cover over the compartment and
turn it clockwise while applying light pressure on it until it clicks
in place.
10 - English