Table of Contents
Advertisement
GUIDE RAIL INSTALLATION GUIDELINES
The following diagrams are a guideline for the installation of the guide rails, fitting may be
required where guide rails arrive loose in the chamber or when they are supplied
separately, for instance on projects where a separate turret is to be installed.
Slot the rails onto the the guide(s) on the
B
upper bracket.
Once the rails are fully seated, bolt the upper
D
bracket in place so that they are secure.
© Automated Environmental Systems Ltd. February 2022
Remove the upper bracket from top of
A
turret.
Then position the other end of the rails down
C
onto the guide(s) of the lower pedestal.
Advertisement
Table of Contents
