Advertisement
Quick Links
Advertisement
Related Manuals for Benchmark Orbi-Shaker
Summary of Contents for Benchmark Orbi-Shaker
- Page 1 Operations Manual...
- Page 2 Index: I. General Information II-1. Introduction II-2. Installation II-3. Specifications II-4. Features III-1, Operation III-2. Platform Installation III-3. Maintenance IV-1. Service and Contact...
- Page 3 I. General Information NOTE : Before operating the Orbi-Shaker, please take a few minutes to familiarize yourself with the contents of this manual. Thank you for purchasing the Orbi-Shaker. This operations manual contains instructions for the care of this Instrument. In order to use the instrument properly, please read this manual carefully before operation.
- Page 4 II-3. Specification 1) Dimension (External) : 28(W) X 42.7(D) X 9(H) cm / 11(W) x 16.8(D) x 3.5(H) Dimensions (Platform): 30(W) x 33(D) cm / 12(W) x 13(D) in. 2) Speed range : 30 - 300 RPM 3) Shaking Orbit: 19mm (3/4”) 4) Timer : Digital - 1 min.
- Page 5 III-1. Operation ▶Booting Press the power switch into the ON position, the display illuminates booting screen displayed for 2 seconds before showing the “Basic View” screen. NOTE: If the shaker has been powered off before the completion of a run, the unit will automatically power on to the previous settings.
-
Page 6: Advanced Mode
BASIC to ADVANCED ADVANCED to BASIC 3.1.2. Advanced View Screen ▶ Advanced Mode To switch from the standard BASIC view To the ADVANCED view, TOUCH “MENU” and choose ADVANCED View. NOTE: To return to the BASIC View, TOUCH “MENU” and choose the BASIC View. The ADVANCED View provides the user with access to the STEP mode for linking consecutive mixing cycles. - Page 7 ▶ Shaker setting (Advanced) ⓐ Adjusting the Shaking Time ⓐ TOUCH the TIME value, the screen turns to the Shaker setting screen ⓑ TOUCH the “Time Set” Value to adjust the set shaking time. ⓑ ⓒ Input the desired value by using the key pads in the setup screen ⓓ...
-
Page 8: Alarm Mute
BASIC View ADVANCED View ▷ Alarm Mute The audible alarm can temporarily deactivated by TOUCHING the key when the audible alarm is active (beeping). This silences/mutes the alarm for 10 minutes. and the icon is displayed as Following the 10 minute mute, if alarm event continues, audible alarm is unmuted. -
Page 9: Warning Messages
▶Step Cycle Ending Screen ⓐ ⓐ When the time for each step has expired, the “Shaker End” message is displayed ⓑ ⓑ “Set” displays the setting value of 1 step (Default value is displayed when Step Off) Time is displayed as 0 ⓒ... - Page 10 III-2. Platform Installation The Orbi-Shaker includes a flat non-slip platform for low speed operation with many common vessels, including trays and dishes. For installation of any of the optional platform the user must: 1.) Unscrew the four metal, platform screws from the corners of the internal platform and remove the green rubber mat.