Download  Print this page

Settings For The Display (screen Setup) - Sony DVP-NS77H Operating Instructions Manual

Sony operating instructions cd/dvd player dvp-ns77h.
Hide thumbs

Advertisement

Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select "SCREEN SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 55).
The default settings are underlined.
SCREEN SETUP
TV TYPE:
HDMI RESOLUTION:
JPEG RESOLUTION:
YC
C
/RGB (HDMI):
B
R
SCREEN SAVER:
BACKGROUND:
BLACK LEVEL:
BLACK LEVEL
4:3 OUTPUT:
◆ TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
4:3
Select this when you connect a
LETTER
4:3 screen TV. Displays a wide
BOX
picture with bands on the upper
and lower portions of the
screen.
4:3
Select this when you connect a
PAN SCAN
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
16:9
AUTO
(1920×1080p)
HD
YC
C
B
R
ON
JACKET PICTURE
ON
:
OFF
(COMPONENT OUT)
FULL
Note
Depending on the DVD, "4:3 LETTER BOX" may
be selected automatically instead of "4:3 PAN
SCAN" or vice versa.
◆ HDMI RESOLUTION
Selects the type of video signals output from
the HDMI OUT jack. When you select
AUTO (1920× 1080p) (default), the player
outputs video signals of the highest resolution
acceptable for your TV. If the picture is not
clear, natural or to your satisfaction, try
another option that suits the disc and your
TV/projector, etc. For details, refer also to the
instruction manual supplied with the TV/
projector, etc.
AUTO
Normally, select this.
(1920× 1080p)
1920× 1080i
Sends 1920× 1080i video
signals.
1280× 720p
Sends 1280× 720p video
signals.
720× 480p
Sends 720× 480p video signals.
To reset the setting
If the picture does not appear normal or goes
blank, press [/1 to turn off the player, and
enter "369" using the number buttons on the
remote, then press [/1 to turn on the player
again.
Notes
• In case of "AUTO (1920× 1080p)," the player
automatically adjusts the video signals that are
suitable for the TV.
Other cases, the player directly send the signal
even if TV cannot accept.
• When the HDMI indicator on the front panel
lights up, images from the S VIDEO OUT and
LINE OUT (VIDEO) jacks are enlarged
vertically. (Except when 720× 480p is selected).
◆ JPEG RESOLUTION
Selects the type of JPEG resolution so that
you can enjoy high picture quality via your
HDMI connection.
You cannot select this when "HDMI
RESOLUTION" is set to "720× 480p" or
"TV TYPE" is set to "4:3 LETTER BOX" or
"4:3 PAN SCAN".
US
57
,continued

Advertisement

Chapters

Table of Contents

   Also See for Sony DVP-NS77H

   Related Manuals for Sony DVP-NS77H

This manual is also suitable for:

Dvp-ns77h/sDvp-ns77h/b

Comments to this Manuals

Symbols: 0
Latest comments: