Sony DVP-NS77H Operating Instructions Manual page 62

◆ DOLBY DIGITAL (DVDs only)
Selects the type of Dolby Digital signal.
D-PCM
DOLBY
DIGITAL
Note
If the HDMI OUT jack is connected to equipment
not compatible with DOLBY DIGITAL signals, the
"D-PCM" signals will be automatically output even
when you select "DOLBY DIGITAL."
◆ DTS
Select the type of DTS audio signals.
OFF
ON
Note
If the HDMI OUT jack is connected to equipment
not compatible with DTS signals, the "OFF" signals
will be automatically output even when you select
"ON."
US
62
Select this when the player is
connected to an audio
component without a built-in
Dolby Digital decoder. You can
select whether the signals
conform to Dolby Surround
(Pro Logic) or not by making
adjustments to the
"DOWNMIX" item in
"AUDIO SETUP" (page 61).
Select this when the player is
connected to an audio
component with a built-in
Dolby Digital decoder.
Select this when the player is
connected to an audio
component without a built-in
DTS decoder.
Select this when the player is
connected to an audio
component with a built-in DTS
decoder.
◆ 48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
48kHz/16bit The audio signals of DVD
VIDEOs are always converted
to 48kHz/16bit.
96kHz/24bit All types of signals including
96kHz/24bit are output in their
original format. However, if the
signal is encrypted for
copyright protection purposes,
the signal is only output as
48kHz/16bit.
Notes
• The analog audio signals from the LINE OUT
L/R (AUDIO) jacks are not affected by this
setting and keep their original sampling frequency
level.
• If the HDMI OUT jack is connected to equipment
not compatible with 96 kHz/24 bit signals,
48 kHz/16 bit PCM will be automatically output
even when you select "96kHz/24bit."
◆ AUDIO (HDMI)
Selects the type of audio signal output from
the HDMI OUT jack.
AUTO
Normally, select this. Outputs
audio signals according to the
"DIGITAL OUT" settings
(page 61).
PCM Converts Dolby Digital, or
96 kHz/24 bit PCM signals to
48 kHz/16 bit PCM.
Note
A loud noise (or no sound) will be output if you
connect the player to a TV that is not compatible
with DOLBY DIGITAL/DTS signals and "AUTO"
is selected. In this case, select "PCM."