Assembly And Adjustment - Levita PLD2430 User Manual

4. UNPACKAGE

Remove appliance from the box and remove all packing materials.

Check the completeness of the packing content.

Check the appliance, the power cord, the power plug and all accessories for transportation damages.

Keep the packaging materials as far as possible till the end of the warranty period. Dispose it into your local
waste disposal system afterwards.
WARNING! Packing materials are no toys! Children must not play with plastic bags! Danger of
suffocation!
CONTENT:
1 Heat gun
1 Handle grip
1 Weeding nozzle
1 Charcoal lighter nozzle
1 Instruction manual
When parts are missing or damaged, please contact your dealer.
5. ASSEMBLY AND ADJUSTMENT
WARNING! Prior to assemmbly and changing the accessory always pull the plug from the
socket!
The device is supplied assembled with a separate extension handle.
If necessary for certain types of work, the extension piece (6) is easily attached to the device. Slide and hold the
extension handle until it is firmly placed. If you use the appliance as a weed killer, you must use it with the
extension handle and hold it firmly behind the additional handle (7) while working. To release the extension
handle, press the lock button (5) and slide the handle out of the way.
When installing the nozzle (nozzles), it is necessary to slide the attachment on the head of the device and slide
slightly to the left after the slide, to secure both parts. When releasing, it is necessary to do the opposite.
6. USEING
WARNING! Follow the instructions carefully. SAFETY PRECAUTIONS.
Risk of burn or fire
This device works with temperatureof 600°without visible signs (no flame), still there
is a chance of fire risk. Watch out for the hot air stream from the nozzle. This hot stream
can cause burns.
6.1 Check before useing

Allways check the woltage of the appliance corresponds with the power voltage.

Mains lead and plug are in a good state (without ravels or damage).

Device is in position „0" before plug.
6.2 During useing

Don´t hold the device too close to the surface about to be worked and dont cover air ventilator. Device
can overheat.

Don´t touch hot nozzle.
21