2. INTENDED USE
Your heat gun has been designed for stripping paint, soldering pipes, shrinking PVC, welding and bending
plastic as well as general drying and thawing purposes. This device can only be used for the intended purpose.
In the event of non‐compliance with the regulations and instructions, the manufacturer can not be held liable
for any damages incurred.
WARNING! Read this manual and general safety Instructions carefully before using the
appliance, for your own safety. Your power tool should only be passed on together with these
instructions.
3. DESCRIPTION
1. Switch (0/I/II)
2. Hot air nozzle
3. Kick stand
4. Air ventilation
5. Lock button
6. Extension pole
7. Handle grip
8. Weeding nozzle
9. Cable hook
10. Charcoal lighter nozzle
20