Installing Internal Antenna (Location 3) - Dell OptiPlex 3000 Micro Service Manual

Steps
1. Remove the screw (M3x3MM) that secures the internal antenna assembly to the chassis.
2. Remove the captive screw that secures the internal antenna cover to the chassis and lift it away.
3. Push the internal antenna assembly inside from the opening on the back view and lift it away from the chassis.

Installing internal antenna (Location 3)

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of an internal antenna and provide a visual representation of the removal procedure.
44 Removing and installing components