Removing The Hard-Drive Bracket - Dell OptiPlex 3000 Micro Service Manual

Steps
1. Press the release tabs on the hard-drive assembly and slide it towards the front of the system to disconnect it from the
connector on the system board.
2. Lift the hard drive assembly from the system.
NOTE: Note the orientation of the hard drive so that you can replace it correctly.

Removing the hard-drive bracket

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the hard-drive
About this task
The following images indicate the location of the hard-drive bracket and provide a visual representation of the removal
procedure.
20 Removing and installing components
before working inside your
assembly.
computer.