Removal Of Bellows And Outer Cylinder - Sakai RS45 Manual

3) Remove the C-retaining ring (5) holding the gear (6) in
place and then remove the gear.

3-5. Removal of Bellows and Outer cylinder

• The lead line numbers shown in the illustration below are
consistent with the part numbers of the cylinder shown on
pages 5-010.
1) As shown in the figure, tap the bellows (7) with a plastic
hammer or similar tool to remove it from the outer cylinder
(1).
6
1, 7
RAMMING SYSTEM
5
RS45-05010
RS45-05011
5-013