RAMMING SYSTEM
2-3. Removal of Centrifugal Clutch
• The lead line numbers shown in the illustration below are
consistent with the part numbers of the ramming system
shown on pages 5-002 and 5-004.
1) Remove the nut (18) and clutch plate from the centrifugal
clutch (20).
2) Remove the centrifugal clutch (20) with the clutch pullers.
CAU T IO N
Be careful not to damage the thread grooves on the
shaft.
5-006
Clutch plate
18
Clutch puller
20
RS45-05003
20
RS45-05004