NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1. Remove the
base
cover.
2. Remove the
wireless
card.
3. Remove the
display
assembly.
4. Remove the
display
bezel.
Procedure
NOTE:
Ensure that the display assembly is placed on a clean and flat surface.
1. Open the latch and disconnect the camera cable from the camera.
2. Peel the camera from the display assembly.
74
Removing the camera
Removing the camera
computer. After working inside your computer, follow the instructions in
36
After
www.dell.com/