Getting Started; Connections - Sony KV-F25 Operating Instructions Manual

Getting Started

Connections

Connecting a VHF antenna or a combination VHF/UHF antenna
— 75-ohm coaxial cable (round)
Attach an optional IEC antenna connector to the 75-ohm coaxial cable.
Plug the connector into the
Rear of TV
Connecting optional equipment
You can connect optional audio/video equipment to your TV such as a VCR, multi disc player, camcorder,
headphones, or stereo system.
Rear of TV
VIDEO IN MON/TV
OUT
1 2
S1 VIDEO
When connecting a monaural VCR
Connect the yellow plug to VIDEO and the black plug to
AUDIO-L (mono).
When both S1-Video and video signals are input
The S1-Video input signal is selected. To view a video signal,
disconnect the S1-Video connection.
6
Getting Started
(antenna) socket at the rear of the TV.
to antenna
socket
VIDEO
L ( MONO )
AUDIO
Video (yellow)
R
Audio-L (white)
to video
Audio-R (red)
and audio
inputs
– AUDIO –
S1 VIDEO VIDEO L R
( MONO )
VIDEO IN 3
Rear of TV
or
to antenna
output
to video
and audio
outputs
Camcorder
Note on the S1-Video signal
When inputting the S1-Video signal through the VIDEO IN 1 or
VIDEO IN 3 jack, turn wide mode OFF if you do not want to
display the picture in wide mode (see page 17).
Note on the video input
When no signal is input, the screen becomes blue.
On a wall
VCR
to S video
output
to video and
audio outputs
: Signal
flow