Drive System - Takeuchi TB53FR Workshop Manual

DRIVE SYSTEM

DRIVE SYSTEM
DISASSEMBLY AND ASSEMBLY
Removing the Engine
1. Disconnect the battery ground cable (1) from the
battery.
2. Remove the engine hood and side cover.
"Removing the Covers"
3. Remove the counterweight.
"Removing the Upper Frame"
4. Tilt up the floor frame.
5. Remove the radiator and oil cooler.
"Removing the Radiator and Oil Cooler"
6. Disconnect the air hose (2) from the engine.
7. Disconnect the coolant drain hose (3).
8. Close the valves (4) and disconnect two heater
hoses.
9. Disconnect the fuel hoses (5) and (6) from the
engine.
10. Disconnect the fuel hoses (8) from water separa-
tor (7).
11. Disconnect the electric wiring to the feed pump (9).
12. Remove the filler cap (10) from the bracket (11).
• Remove the filler cap with hose attached and
put it on the fuel tank.
13. Remove the water separator (7) and the feed
pump (9) together with the bracket (11).
14. Remove the hydraulic pump.
"Removing the Hydraulic Pump"
MACHINE CONFIGURATION
2
10 11
7
8
5
9
17
3
III-3
6
12
17
14
15
TB53FR
."+ $
4
J1C101
J1C102
16
17
J1C103