Chapter 2 Device Management; Activate The Device - HIKVISION iVMS-4200 User Manual

The device can be configured and managed through iVMS-4200 software, mainly including
network parameter configuration, wireless configuration, system maintenance, and so on.
Note
● This chapter will briefly introduce the device management through iVMS-4200 software. For
other functions, please refer to User Manual of iVMS-4200 Software.
● All pictures in this manual are for illustration only, and the specific interface is subject to the
actual device.

2.1 Activate the Device

For the inactive devices, you are required to create a password to activate them before they can
be added to the software and work properly.
Before You Start
Make sure the device to be activated is connected to the network and is in the same network
segment with the PC running the client.
Steps
Note
This function should be supported by the device.
1. Run iVMS-4200 software.
2. Go to Device Management → Device.
3. Click Online Device to show the online devices.
The searched online devices are displayed in the list.
4. Check the device status (shown on Security Level column) and select an inactive device.
5. Click Activate.
6. Create a password in the password field, and confirm the password.
Wireless Bridge (Client) User Manual

Chapter 2 Device Management

Figure 2-1 Online Inactive Device
2