Duramaxx Powerpoint Manual page 23

4 Switch on the pinpointer. The signal strength LED will initially light up
twice and the vibration motor will vibrate twice. Then the illumination LED
will turn on, which means that the unit has automatically balanced itself.
The pinpointer is then in the waiting state.
Note: If you change the location of the unit or rotate the unit, the unit may
constantly deflect or the sensitivity of the display may decrease due to
the influence of the magnetic field or electromagnetic fields in the vicinity.
If this happens, press the balance button briefly to rebalance the unit to
maintain accuracy in indicating the location of an object.
Continue to hold the pinpointer in a vertical position above the coin and
move it slowly towards the coin (see illustration). At a distance of about
3 cm, the pinpointer will start to react, it will vibrate and the red light will
come on. As you get even closer to the coin, the vibration intensity will
increase and the LED light will illuminate in the sequence of red, green,
blue and white. Additionally, when the LED light reaches white, the
vibration intensity will be at its highest.
EN
23