Related Manuals for igus i.Sense CF.D
Summary of Contents for igus i.Sense CF.D
- Page 1 ® igus smart plastics German version i.Sense CF.D Manual V1.1 Instruction manual 1/13 Manual i.Sense CF.D - V 1.1...
-
Page 2: Table Of Contents
Update ....................8 Commissioning ....................8 Adjusting the threshold value (i.Cee:plus II user interface) ....9 Warnings and errors ..................11 Maintenance ....................11 Troubleshooting ....................12 FAQs ........................12 Accessories .....................12 Abbreviations ....................12 Definition......................12 Service ......................13 2/13 Manual i.Sense CF.D - V 1.1... -
Page 3: Introduction
CF.D is not a safety component within the meaning of the Machinery Directive and must not be part of the safety concept. i.Sense CF.D is not a safety component within the meaning of the Machinery Directive and offers no protection against personal injury. -
Page 4: Safety Notices, Protective Measures And Guidelines
GmbH only assumes a warranty for products from igus in accordance with the standards, norms and specifications in this manual. The warranty extends exclusively to the exchange or repair of a defective i.Sense CF.D. No liability is assumed for consequential damages and consequential errors. -
Page 5: Electromagnetic Compatibility
Avoid interference with control cables, reduce emissions. connector housings. 3 Product 3.1 Modes Mode Description Updates and firmware reset Config mode Determination of the data after start of the measurement, setting of the measurement Measuring mode parameters 5/13 Manual i.Sense CF.D - V 1.1... -
Page 6: Specifications
3... 100 mW Risk of destruction An operating voltage above the voltage specified in the technical data destroys the i.Sense CF.D. Select an operating voltage that is within the voltage range specified in the technical data. Be aware of possible disturbances and induced voltages caused by other consumers and/or motors and plan appropriate safety reserves and countermeasures. -
Page 7: Installation
After turning off, wait at least 5 minutes for the capacitors to discharge. Check the absence of voltage before working in the system. Occurrence of electric arcs in the case of electrical connections that are not properly installed. To i.Sense CF.D connected cables must not have exposed and stripped wire ends. In addition, ensure that all connections are securely seated. -
Page 8: Configuration Mode
Set 400 transmission channel Overview of settings made Start measurement, Works with i.Cee:plus II via plug and play When using long cables, an Adjusting the threshold in Grafana adjustment of the power is necessary. 8/13 Manual i.Sense CF.D - V 1.1... -
Page 9: Adjusting The Threshold Value (I.cee:plus Ii User Interface)
6.1 Adjusting the threshold value (i.Cee:plus II user interface) Login (Grafana) Login Grafana User: admin Password: Com17Sperce Change the numeric color display on the right (red box) by clicking On Edit Confirm by clicking on Apply and Save 9/13 Manual i.Sense CF.D - V 1.1... - Page 10 Commissioning Change alerting rule Adjust threshhold 10/13 Manual i.Sense CF.D - V 1.1...
-
Page 11: Warnings And Errors
Button LED None Device is disconnected from power supply 8 Maintenance Wi-Fi Internet For optimal functioning, updates are available at irregularintervalsthat can be installed via connection is required to configurationmode. install the updates 11/13 Manual i.Sense CF.D - V 1.1... -
Page 12: Troubleshooting
II 12 Abbreviations Abbreviation Description Electromagnetic compatibility Electrostatic discharge (Elektrostatische Entladung) Graphical User Interface Programmable Logic Controller (Speicherprogrammierbare Steuerung) 13 Definition Concept Description Configmode Update and Reset Mode Measuring Normal operation, measurement mode 12/13 Manual i.Sense CF.D - V 1.1... -
Page 13: Service
Possibility to order sensors, processing units and other accessories Contact www.igus.de info@igus.de +49 (0) 2203-9649-0F Legal notice © 2021 All rights at ® igus GmbH Spicher Str. 1a 51147 Cologne Sebastian Probst 13/13 Manual i.Sense CF.D - V 1.1...
Need help?
Do you have a question about the i.Sense CF.D and is the answer not in the manual?
Questions and answers