JVC HX-Z10 Service Manual page 9

3.1.6 Rmoving the fan assembly
(See Fig.17, 18)
• Prior to performing the following procedure, remove the metal
cover, the CD changer mechanism assembly and the rear pan-
el.
(1) Cut the band with for fan wire holder.
(2) Remove two screws G on the rear panel.
(3) Rotate fan assembly in clockwise direction to release fan
assembly from rear panel (joints c).
3.1.7 Removing the main board
(See Fig.19)
• Prior to performing the following procedure, remove the metal
cover, the CD changer mechanism assembly and the rear pan-
el.
(1) Cut off the band.
(2) Disconnect the card wires from connector
CN870 on the main board.
(3) Remove the screw H attaching the main board.
(4) Disconnect connector
board outward and release from the base chassis (joint d)
upward.
1-12 (No.MB014)
All manuals and user guides at all-guides.com
CN44
CN217 and CN311 on the main
Rear panel
c
Band
and
CN870
CN44
Fig.17
Band
c
Fan assembly
Fig.18
Main board
CN217
H
d
CN311
Fig.19
G