JVC HX-Z10 Service Manual page 5

3.1.2 Removing the CD changer mechanism assembly
(See Fig.4, 5)
• Prior to performing the following procedure, remove the metal
cover.
(1) Disconnect the card wire from connector
servo control board on the right bottom of the CD changer
mechanism assembly.
(2) Remove the four screws C attaching the CD changer
mechanism assembly on top of the body.
(3) Remove the CD changer mechanism assembly while lifting
the rear part.
CAUTION:
Do not damage the CD fitting when removing the CD changer
mechanism assembly.
1-8 (No.MB014)
All manuals and user guides at all-guides.com
CN651 on the CD
C
CD changer mechanism assembly
Front panel assemby
CD servo control board
Fig.4
CD changer
mechanism assembly
Fig.5
CN651
C