Setting The Clock - Sony MDS-E12 Operating Instructions Manual

Setting the Clock

A clock is built in this recorder. The recording
time is recorded automatically on the disc to set
the clock in advance. You can check the recording
time during play.
1
Press the Menu/NO button twice during stop.
"Setup Menu" is displayed.
2
Turn AMS (or press ./> repeatedly) to display
"Calendar" and press AMS.
The portion of "Year" flashes.
2 0 0 0 -
3
Turn AMS (or press ./> repeatedly) to set the
"Year" and press AMS.
The portion of "Year" lights up and the portion of
"Month" flashes.
2 0 0 0 -
4
Similarly with step 3, set "Month," "Day," "Hour,"
and "Minute" in this order.
After "Complete !" is displayed for several seconds
and disappears, the clock starts to work.
Resetting the clock
1
Do steps 1 to 2 of "Setting the Clock" on this page.
2
Press AMS or m/M repeatedly to flash the
portion to be changed.
3
Turn AMS (or press ./> repeatedly) for setting
and press AMS.
4
After setting, press AMS or m/M repeatedly to
flash the portion of "Minute" and press AMS or
YES.
MENU / NO YES
AMS /
7 - 1 2
1 9 : 0 0
7 - 1 2
1 9 : 0 0
Watching the clock Z
When the power is on, you can watch the clock.
Press DATE PRESENT.
When DATE PRESENT is pressed once, the date and time
are displayed for about 2 seconds and they are returned to
the original display.
• If you want to record more precise recording time,
set the clock once a week.
Checking the recording time Z
If the built-in clock is set, the recording time is
recorded on the MD. You can check the recording
time at the display window during play.
1
Select a track for which you want to check the
recording time.
Select a track by ./> during stop.
Select a track by ./> or Number during play or
pause of play.
2
Press DATE RECORDED.
"No Date" is displayed if the clock is not set or for the
track recorded by a component without a function of
recording the recording time.
Selecting the order of year, month, and
day of clock display
You can select the order of the year, month, and
day of clock display from the following three
ways:
1
Press MENU/NO twice during stop.
"Setup Menu" is displayed.
2
Turn AMS (or press ./> repeatedly) to display
"Date Time" and press AMS or YES.
3
Turn AMS (or press ./> repeatedly) to select
the order of the year, month, and day and press
AMS or YES.
Order of year, month, and day
D a t e T i m e
Y Y Y Y M M
Order of month, day, and year
D a t e T i m e
M M D D
Order of day, month, and year
D a t e T i m e
D D M M
4
Press MENU/NO.
D D
Y Y Y Y
Y Y Y Y
17