Eco Mode (Power Saving, Low Noise); To Select The Eco Mode - Casio XJ-M140/XJ-M145* User Manual

Eco Mode (Power Saving, Low Noise)

The following three Eco Mode settings are available to specify whether priority should be given to
low-power, low-noise operation or to projection brightness.
On (Auto) : A brightness sensor on the top of the projector senses surrounding light, and
automatically adjusts projection brightness and color accordingly. Brightness is
reduced for darker surroundings, which saves power and reduces operation noise.
On (Manual): Enables manual adjustment to balance the needs of low-power, quiet operation and
projection brightness.
Off : Give top priority to projection brightness.
Important!
While "On (Auto)" is selected as the Eco Mode setting, make sure that the brightness sensor
on the top of the projector is not blocked by anything.
The local environment and setup conditions affect the brightness sensor, so operation when
"On (Auto)" is selected for the Eco Mode depends on these factors.

To select the Eco Mode

1.
Press the [ECO] key.
This causes "Eco Mode" window to appear on the projection screen.
2.
Use the [ ] and [ ] keys to select the setting you want.
If you select "On (Manual)" here, go to step 3. If you select another setting, jump to step 4.
3.
Perform the following steps to adjust the "Eco Level" (the balance between
low-power, quiet operation and projection brightness).
1
Press the [ ] key to move the highlighting to the Eco Level.
2
Use the [ ] and [ ] keys to adjust the Eco Level to the setting you want.
Fewer marks gives higher priority to projection brightness. A greater number gives high
priority to low-power, quiet operation.
4.
To hide the window, press the [ESC] key.
Important!
The Eco Mode setting automatically changes to "Off" whenever the projector is in the 3D input
mode. See "3D Input Mode" (page 10).
The "On (Auto)" setting cannot be selected for the Eco Mode while "On" is selected for
"Screen Settings
changed to "On" while "On (Auto)" is selected for the Eco Mode setting, the Eco Mode setting
will automatically change to "On (Manual)".
The "On (Auto)" setting cannot be selected for the Eco Mode while "Rear" is selected for
"Screen Settings
changed to "Rear" while "On (Auto)" is selected for the Eco Mode setting, the Eco Mode
setting will automatically change to "On (Manual)".
Ceiling Mount" on the setup menu. If the "Ceiling Mount" setting is
Projection Mode" on the setup menu. If the "Projection Mode" setting is
18