Casio XJ-M140/XJ-M145* User Manual page 32

Setting Name Input
Ceiling Mount R C V H D U N Single
Startup Screen R C V H D U N Single
No Signal R C V H D U N Single
Screen
Blank Screen R C V H D U N Single
Restore Menu R C V H D U N Source
Defaults
Setting Unit
Use this sub-menu to configure the projector for use in an
installation in which it is positioned upside down.
On:
Flips the projected image horizontally and vertically.
Off*:
Projects a normal image.
Use this sub-menu to specify whether or not a startup screen should
be projected whenever the projector is turned on.
Logo:
Select this option to project the projector's built-in logo screen at
startup.
None*:
Select this option when you do not want to project a startup
screen.
Use this sub-menu to specify what should be projected when there
is no input signal to the projector.
Blue*:
Select this option to project a blue screen.
Black:
Select this option to project a black screen.
Logo:
Select this option to project the projector's built-in logo screen.
Use this sub-menu to specify what should be projected after the
[BLANK] key is pressed.
Blue:
Select this option to project a blue screen.
Black*:
Select this option to project a black screen.
Logo:
Select this option to project the projector's built-in logo screen.
Use this sub-menu to return all of the sub-menu items on the Screen
Specific Settings main menu to their initial default settings.
Restoring menu defaults when there is no input signal will restore
defaults for the currently selected input source.
Note that the "Keystone Correction", "Projection Mode", "Ceiling
Mount", "Startup Screen", "No Signal Screen", and "Blank
Screen" settings are always returned to their initial defaults,
regardless of the currently selected input source.
32
Description