C-lock SmartFeed Pro Manual page 20

6. From this interface, you can:
a. see the current state of each sensor on the system.
b. Configure the system for training mode or regular mode *
c. Zero/Tare the bin
d. Recalibrate the bin
e. Manually move the high-power kick-out actuator
f. Manually unlock the door
g. Indicate that the bin is about to be emptied or filled
h. View a real-time plot of data
i. Change WiFi network credentials for the feeder
j. Return to the list of all scanned feeders
k. See which feeders are currently connected
Figure 14) Control Feed Main Interface Controls
19