Checking Your Eid (Rfid) Tags - C-lock SmartFeed Pro Manual

Figure 11) Zeroing (Taring) and Calibrating SmartFeed
2.7.

Checking your EID (RFID) Tags

To check if the RFID reader is working for your EID tags:
1. You will need a spare ear tag.
2. Open the electronics box by unlatching the 2 fasteners (Figure 12).
3. Hold the ear tag next to the RFID antenna (Figure 1).
4. Watch for the green "READ" light to blink on the RFID circuit board in the
electronics box. When you see the green "READ" light blink, this means it
has detected an RFID tag.
Figure 12) Checking the RFID Reader
17