Setup; Adjusting The Closed Door Height - C-lock SmartFeed Pro Manual

2. Setup

2.1.

Adjusting the Closed Door Height

The closed-gate height can be adjusted to provide access to smaller or larger animals.
Perform the following to adjust the door height:
1. Tap the "Unlock Door" button on the Control Feed app.
2. Open the gate far enough to be held open by the training latch.
3. Remove the gate-height adjustment pin and re-insert into the desired hole.
4. For smaller animals, place the pin in the highest hole. For larger animals, place
the pin in the lowest hole.
5. Remove the training latch and allow the gate to close.
6. Ensure that the gate successfully latches onto the pin, the Control Feed app
status should show "Door State: Closed".
Figure 6) Gate Adjustment for Smaller or Larger Animals
10