Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for M-LOCKS MiniTech
- Page 1 MiniTech User Instructions...
-
Page 2: Table Of Contents
User instructions MiniTech Table of contents TABLE OF CONTENTS IMPORTANT NOTES! GENERAL INFORMATION OVERVIEW FUNCTIONS LOCK OPENING (01) (02-49): ANAGER AND USERS (50-59): VERRIDE USERS CODE CHANGING INSTALL/DISABLE/DELETE USERS LOCK SETUP ETUP WITH ALLAS KEY ETUP WITH OPENING WITH DYNAMIC CODES... - Page 3 User instructions MiniTech – V EEKLY TIME LOCK SETTINGS ERIFY OR DELETE VALUES (OFF ) – A LOSING PERIODS DAYS DD NEW VALUES PENING PERIODS DD NEW VALUES PENING PERIODS ERIFY OR DELETE VALUES UDIT OWNLOAD THE AUDIT ON A...
-
Page 4: Important Notes
User instructions MiniTech Important notes Before installing this product, please read carefully the installation and operating instructions. Locks have been designed to correctly operate in a temperature range from -5°C to + 50°C and and in an environment with non-condensing humidity between 25% and 90%. -
Page 5: General Information
User instructions MiniTech General information Using your keypad Press any button to power up the keypad. LCD which shows: ENTER CODE X X – X X X X X X If more locks are installed, LCD shows: SELECT LOCK Enter the lock number to select it. - Page 6 User instructions MiniTech If a wrong code is entered, LCD displays the message: WRONG CODE If a wrong dynamic/activation code is entered, LCD displays the WRONG DYNAMIC CODE message: If a dynamic/activation code is entered more than 30 minutes...
-
Page 7: Overview Functions
User instructions MiniTech = Exit and back to the main menu = Master menu User properties and default codes Users can be set for opening with code only, code + Dallas key or with Dallas key only. It is also possible to set a dual mode opening: in this case, entering the two users codes is required to open the lock. -
Page 8: Lock Opening
Some options/characteristics reported in this user manual, can only be used if previously enabled through the setup software. Thus, please refer to the user manual IU_Minitech_setup_XX. Please contact service@m-locks.com for further information. Lock opening Manager (01) and users (02-49): Power up the keypad and enter an opening code. LCD shows: OPEN Open the lock within 3 seconds. -
Page 9: Code Changing
User instructions MiniTech Code changing WARNING: it is recommended to always perform this operation with door open. Manager (ID 01), users (ID 02-49) and override users (ID 50-59) ENTER OLD CODE Power up the keypad. Press and hold . LCD shows: X X –... -
Page 10: Setup With Pc
User instructions MiniTech SYSTEM SETUP Power up the keypad. Press and hold . LCD shows: 08:00 FRI Insert the setup Dallas key in the reader and connect the reader with 27/01/2019 the keypad by means of the jack connector. LCD shows: Check time and date. -
Page 11: Block And Unblock The Lock
User instructions MiniTech Block and unblock the lock BLOCK SYSTEM Power up the keypad. Press and hold . LCD shows: X X – X X X X X X Enter the requested code. If a weekly time lock is already scheduled, LCD shows the next opening... -
Page 12: Keypad Language
User instructions MiniTech Keypad language ITALIANO Power up the keypad. Press and old . LCD shows: 1 2 3 Enter one of the numbers shown on the LCD to select a new language ENGLISH 1 2 3 (the new language will be automatically changed). Press confirm or to exit. -
Page 13: Download Audit On Pc
User instructions MiniTech Enter Manager code. LCD shows: ENTER DALLAS … DOWNLOADING Insert the Audit Dallas key into the reader. Events download begins automatically. LCD shows: If download is successful, LCD shows: OPERATION DONE Use the software Tecnosicurezza DMT Audit to download the events on PC. -
Page 14: Time Delay
User instructions MiniTech Enter a value 1÷8 to select a different contrast level which will be quickly applied. Press to confirm or to exit. Time delay SET TIME DELAY Power up the keypad. Press and hold . LCD shows: 01 – X X X X X X Enter Manager code. -
Page 15: Master Menu
User instructions MiniTech Press a further time to exit. Master menu MASTER MENU Power up the keypad. Press and hold . LCD shows: X X X X X X X X Enter Master code (default value 1-2-3-4-5-6-7-8). Time & date settings TIME AND DATE Power up the keypad and enter the Master menu. -
Page 16: Weekly Time Lock Settings - Verify Or Delete Values
User instructions MiniTech All values entered can be saved only by pressing Inside Time Lock menu, opening time intervals are indicated: it means the safe can be opened by entering a valid code, but only inside the time interval itself (ex. opening time interval from 08.00 to 14.00 from Monday to Friday: the safe can be only opened from... -
Page 17: Opening Periods - Add New Values
User instructions MiniTech Enter the time of start and the ending time for the closing period, then press confirm. Should the year be set, the closing period is not repeated. Should not the year be set (press ), the closing period is yearly repeated instead. -
Page 18: Audit
User instructions MiniTech Enter a date and time for opening and closing, then press confirm. Should the year be set, the opening period is not repeated. Should not the year be set (press ), the opening period is yearly repeated instead. -
Page 19: Change Master Code
User instructions MiniTech Enter Master menu. Press until the LCD shows: SYSTEM AUDIT PC LINK Press and wait for few seconds. LCD shows: SCROLL EVENTS 001: Press . After few seconds, LCD shows the last opening/closing 28/09 14:42:48 event recorded. -
Page 20: Dynamic Codes Activation With Static Codes Deleting
AUTOMATIC and MANUAL mode. Press to confirm. With MANUAL, lock can be closed by pressing and holding for 2 seconds. With AUTOMATIC instead, lock automatically re-closes after the time set with MiniTech Setup. IU_MiniTech_05_eng 21 of 24...