M-LOCKS T8530 User Instructions

M-locks t8530 electronic door lock

Download this manual

MASTER MENU

The Master Menu gives the owner of the Master Code access to the following functions:

•

Set time and date

•

Set time lock (T.L.) (standard week and special events)

•

Change code

To get access to the Master Menu, press button

during time delay counting!

The LCD screen will show the following message:

Enter the 8-digit Master Code (default 1-2-3-4-5-6-7-8).

After the 4th consecutive wrong code, a time penalty of 4 minutes will be started. The LCD screen will

then show the following message:

During penalty time the LED flashes every 10 seconds. Every code entry will be rejected by a long

signal.

To enter into the Menu, press button

In case no operation is done in the Master Menu within 30 seconds, the system will automatically

switch off.

M-LOCKS BV

Vlijtstraat 40

NL-7005 BN Doetinchem

. Access to the Master Menu is not allowed

Enter

MASTER code

Penalty

.To select a function, press button

ver. 1.0 2010 12 29

USER INSTRUCTIONS

Tel: +31 (0)314 376 876

Fax: +31 (0)314 376 878

www.m-locks.com

T8530

Page 1 USER INSTRUCTIONS T8530 MASTER MENU The Master Menu gives the owner of the Master Code access to the following functions: • Set time and date • Set time lock (T.L.) (standard week and special events) • Change code To get access to the Master Menu, press button .
Page 2 USER INSTRUCTIONS T8530 Time and Date Menu Use this menu to check or change settings for time and date. 24/06/08 TUE (dd/mm/yy) 08 : 52 : 00 To set time and date, enter new values through the entry unit and press the button to confirm.
Page 3 USER INSTRUCTIONS T8530 • If button is pressed, the system will automatically select the following day of the week, and the entered data will not be saved. • At the end of the list the LCD display will show the following message:...
Page 4 USER INSTRUCTIONS T8530 Special Events: “Verify & Delete” When this function is selected, the display will show all entered special events, in order of time: DD / MM hh : mm DD / MM hh : mm • To run the Menu, press button until the display shows the message ´End of List´.
Page 5 USER INSTRUCTIONS T8530 NOTE: Immediate Time Lock: this function starts up Time Lock immediately. It will not be possible to open the lock until the next programmed opening period. In case the Immediate Time Lock is selected (Time Lock standard week has to be programmed), the LCD display will show the first available opening period.