Page 1
Remove the protective film from the membrane, carefully align the margins and stick it to the housing. Connect one (1) battery to the battery clip. Only use 9V-ALKALINE batteries from brand name manufacturers like DURACELL M-LOCKS BV Tel: +31 (0)314 376 876 Vlijtstraat 40 ver. 1.0 2013 03 11...
Page 2
The lock bolt must move freely into the cavity. Only use M-Locks supplied screws to mount the lock. Tighten the screws securely so the lock body is attached firmly to the mounting surface.
Page 3
The force applied to the bolt must not exceed 1kN. Only use M-Locks supplied screws to mount the lock. Tighten the screws securely so the lock body is attached firmly to the mounting surface. Do not overtorque mounting screws.
Page 4
Connect a 9V-ALKALINE battery and repeat functional test (with door open) several times before locking the safe door. Never remove label on lock cover, this voids the warranty. M-LOCKS BV Tel: +31 (0)314 376 876 Vlijtstraat 40 ver. 1.0 2013 03 11...