Page 1
Echo Handle DIMENSIONS * All measurements in mm MOUNTING INSTRUCTIONS Assemble the handle as shown below. Affix the shaft in the handle with the provided screw. Use a thread locking agent like Loctite® to secure the screw. M-LOCKS BV ver 1.1 2019 05 03...
Page 2
Echo Handle The opening in the door front should be widened to 20 mm, 9 mm deep to provide a fit for the bearing (iglidur®). * All measurements in mm Cut the 8 mm square shaft to an appropriate length. The shaft should stick out of the bolt work 5-8 mm and is secured by using the star washer.