Starting And Stopping Projection; To Start Projection - Casio XJ-M140/XJ-M145* Setup Manual

Starting and Stopping Projection

To start projection

1.
Use the bundled AC power cord to plug the projector into a power outlet.
NOTE
This product is also designed for IT power distribution system with phase-to-phase voltage 230V.
2.
Turn on the computer that is connected to the projector.
3.
If the projector lens cover is covering the lens, remove it.
To remove the lens cover, insert your fingers into its recesses and squeeze towards the middle.
4.
Press the [P] (Power) key.
The first time you turn on the projector, a "Language" window will appear in the center of the
projection screen. Select the language you want.
5.
Select the input source
Press the [INPUT] key to display a list of input sources. Use the [ ] and [ ] keys to select
"Computer" and then press the [ENTER] key.
6.
Adjust the size and the focus of the projected image.
Use the zoom ring of the projector's lens to adjust the size of the projected image, and the focus
ring to adjust the focus.
NOTE
The projector has a keystone correction feature that
prevents distortion of the projected image when projecting
from an angle. The projector detects when it is at a vertical
angle to the screen and performs keystone correction
automatically.
You can use the [KEYSTONE +] and [KEYSTONE –] keys to
adjust keystone correction manually.
Zoom ring
Smaller
Larger
Focus ring
E-14