Using Send To Car - Mazda CX 9 2021 Manual

3-5. Using Send to Car

Send to Car is a function which uses the MyMazda APP to search the destination of the
navigation and send it to the vehicle.
First, use the MyMazda APP and select a destination to be sent to the vehicle.
Then Search for the destination that you wish to set or search for the destination using the map
by touching [MAP] on the home screen.
• If you receive a destination when driving in the vehicle, avoid any distractions and do not
divert your attention away from driving the vehicle.
• To use the navigation system, the SD card containing the map information needs to be
inserted in the SD card slot.
• Send to Car can send up to three destinations concurrently.
• Navigation pathways must be set for the respective destinations received.
• When sending multiple destinations, it is convenient to send them all at once instead of
sending them one after another.
• When the power is off, the vehicle cannot receive a destination. The vehicle will receive the
destination after the engine is started.
• If a location where a route search is not possible such as over water is sent, the destination
of the navigation route will not be set by the vehicle.
• Up to 10 destinations can be set to the navigation route. If you exceed the maximum
number of destinations sent by Send to Car, either discard the routes the vehicle already set
and set the received destination as the new destination, or cancel the received destination.
When editing a navigation pathway, refer to the NAVIGATION SYSTEM Owner's Manual.
Downloaded from ManualsNet.com
54 54
search engine