Table of Contents
Advertisement
STORAGE
Engine Oil
Change the engine oil (see page 55).
Engine Cylinder
1. Remove the spark plug (see page 57).
2. Pour a teaspoon (5 cm
3. Pull the starter rope several times to distribute the oil in the cylinder.
4. Reinstall the spark plug (see page 57).
5. Slowly pull the starter grip until resistance is felt. At this point, the piston is
coming up on its compression stroke and both the intake and exhaust valves
are closed. Storing the engine in this position will help to protect it from
internal corrosion. Return the starter grip gently.
STORAGE PRECAUTIONS
If your generator will be stored with gasoline in the fuel tank, it is important to
reduce the hazard of gasoline vapor ignition.
Select a well-ventilated storage area away from any appliance that operates
with a flame, such as a furnace, water heater, or clothes dryer.
Also, avoid any area with a spark-producing electric motor, or where power
tools are operated.
If possible, avoid storage areas with high humidity, because that promotes rust
and corrosion.
Place the generator on a level surface. Tilting or laying it on its side can cause
fuel or oil leakage.
With the engine and exhaust system cool, cover the generator to keep out dust.
A hot engine and exhaust system can ignite or melt some materials.
Do not use a plastic sheet as a dust cover. A nonporous cover will trap moisture
around the generator, promoting rust and corrosion.
64
3
) of clean engine oil into the cylinder.
Advertisement
Table of Contents
