About The "Infolithium" Battery Pack - Sony Handycam DCR-HC30 Operation Manual

About the
"InfoLITHIUM"
battery pack
This unit is compatible with the
"InfoLITHIUM" battery pack (P series). Your
camcorder operates only with the
"InfoLITHIUM" battery pack.
"InfoLITHIUM" P series battery packs have the
mark.
What is the "InfoLITHIUM" battery
pack?
The "InfoLITHIUM" battery pack is a lithium-
ion battery pack that has functions for
communicating information related to operating
conditions between your camcorder and an
optional AC Adaptor/charger.
The "InfoLITHIUM" battery pack calculates
the power consumption according to the
operating conditions of your camcorder, and
displays the remaining battery time in minutes.
With an AC Adaptor/charger (optional), the
remaining battery time and charging time
appear.
To charge the battery pack
• Be sure to charge the battery pack before you
start using your camcorder.
• We recommend charging the battery pack in
an ambient temperature of between 10°C to
30°C (50°F to 86°F) until the CHG (charge)
lamp turns off. If you charge the battery pack
outside of this temperature range, you may not
be able to charge it efficiently.
• After charging is complete, disconnect the
cable from the DC IN jack on your camcorder,
or remove the battery pack.
To use the battery pack effectively
• Battery pack performance decreases when the
surrounding temperature is 10°C (50°F) or
below, and the length of time you can use the
battery pack becomes shorter. In that case, do
one of the following to use the battery pack for
a longer time.
– Put the battery pack in a pocket to warm it
up, and insert it in your camcorder right
before you start taking shots.
– Use a large capacity battery pack:
NP-FP70/FP90 (optional).
• Frequent use of the LCD screen or a frequent
Additional Information
129