Operation - RADLEY 5044-032 Owner's Manual

OPERATION

TO WASH WITH WATER
1. Turn on the water supply tap. Connect the washer to the power supply and turn the
switch to "ON/I" position. Then press trigger.
NOTE: Before pressing trigger, make sure lock-off switch on the triggere is in "unlock"
position.
WARNING: Do not start the machine without connecting and turning on the water
supply because it may cause damage to high pressure seals and reduce the service life
of pump.
2. Release the trigger and turn the switch to "OFF/O" position. Turn off the water supply
tap.
NOTE: When not in use, make sure Lock-off switch is in "Lock" position.
3. Select the right nozzles. Attach nozzle into the end of the lance by pressing selected
nozzle into place. It will make a click sound when firmly place. To remove nozzle, pull
back on the collar on the lance and pull out the nozzle.
0°NOZZLE-RED: This type of nozzle produces a vertical, stratified, high-pressure jet
for surface cleaning with particularly severe dirt.
15°NOZZLE-YELLOW, 25°NOZZLE-GREEN, 40°NOZZLE -WHITE: These types of
nozzles can produce the corresponding angle fan-shaped high-pressure jet, cleaning
power, for large-scale dirt surface cleaning.
11
UNLOCK
LOCK