Netware V3.12 - SMC Networks SMC9432TX User Manual

NetWare v3.12

Server Driver
Installing the LAN driver is part of the NetWare installation process.
Use the following instructions with those in the NetWare 386
installation manual to install the driver. You will need the
SuperDisk during this procedure.
1. Use EZStart to copy the SMC driver to your hard drive. Refer to
the EZStart instructions in Appendix C.
2. Refer to the "Load LAN driver module" section in the Novell
NetWare 386 v3.12 installation manual for instructions on
installing NetWare.
3. Follow the instructions on starting NetWare and configuring the
server. Use the "Load" command to load the LAN driver. If the
LAN driver is not located in the default directory, specify the
path to the file on the command line. The Load command will
prompt you for configuration parameters if they are not
supplied on the command line.
The Load command line parameters may be saved in an
AUTOEXEC.NCF file, so they execute automatically every time
the server starts. Refer to the NetWare 386 installation manual
on how to create an AUTOEXEC.NCF file.
The following steps are specific to loading the SMCPWR2.LAN
driver. For examples, please refer to the INSTALL.DOC for
loading the NetWare v3.12 server driver on the SMC SuperDisk.
4. To load the driver, type the following at the NetWare System
Console:
Press "Enter" when prompted for a slot number.
I
NSTALLING AND
LOAD SMCPWR2
C N
ONFIGURING ETWORK
D
RIVERS
3-13