Silvercrest KH 2398 Operating Manual page 11

3. Should the currently adjusted station trans-
mit RDS data, the
the display o blinks. Then the display
o shows the name of the radio station,
and the time is updated (if activated in
the settings, see section "Setting Update
function"). During a running time update
via RDS the clock icon in the display o
flashes.
Automatic station search
You can have the kitchen radio search for
stations. The kitchen radio searches the fre-
quency range until it finds a station.
1. Press and hold the button UP
seconds: the kitchen radio searches for
the station with the next highest frequency.
2. Press and hold the button DOWN
l for two seconds: the kitchen radio
searches for the station with the next low-
est frequency.
Repeat these steps until you have found a
radio station to your liking.
Save and recall a radio station manually
As the appliance can be used by numerous
people, it is fitted with user switching, A/B.
Both users can save different radio stations.
To switch between users, press and hold the
button USER/BASS d for two seconds.
Each user can save 32 radio stations in the
appliance. Available for this are:
Preset button M1 r for the save positions
A0 – A7,
Preset button M2 t for the save positions
B0 – B7,
Preset button M3 y for the save positions
C0 – C7, and
Preset button M4 u for the save positions
D0 – D7.
Press the corresponding preset button once
to address the save position "0", press twice
for "1", etc.
1. Set the user and the desired radio station.
2. Press the button MEM SET/AMS h.In
the display o the "MEM" indicator blinks.
indicator in
3. Press one of preset buttons M1–M4
4. Press the button MEM SET/AMS h once
5. Repeat the steps 1 to 4 (for both users)
1( for two

6. To recall the saved radio stations, press

Automatically save and recall a radio
station
With the AMS function (Automatic Memory
System), the radio automatically searches
for stations and stores them at the memory
locations. Previously saved radio stations are
thereby erased.
1. Press and hold the button MEM SET/
2. The station search can be stopped by press-
3. When you press the button MEM SCAN
4. To quickly move on to another radio sta-
5. To quit the automatic recall, press the but-
- 9 -
If the memory location button r– u has
been pressed previously, the memory loca-
tion indicator and the MEM" indicator blink.
r–u, if necessary repeatedly, to save
the radio station to the desired save posi-
tion. In the display o, the indicator for the
save position selected by you and "MEM"
blink.
again. "MEM" and the save position are
constantly indicated, the radio station is
saved.
until all of the desired radio stations are
saved.
the corresponding preset buttons (M1–
M4 r–u) in radio mode, several times
if need be, until the number of the saved
position appears in the display o.
AMS h for two seconds. The kitchen ra-
dio automatically searches for sufficiently
powerful radio stations and saves them in
the memory.
ing on the button MEM SET/AMS h. The
most recently found radio station plays.
f, the saved radio stations are recalled
in their sequence and each is played for
15 seconds.
tion, press the button MEM SCAN f.
ton MODE/ j. The display o will
then show the time for 15 seconds.