Table of Contents
Advertisement
Thank you for choosing our oil heater, please read the instruction carefully before use and
save it for future reference
Product Characteristic
◆ The electric oil heater manufactured by our company uses tubular elements as the heat
source, high-efficiency permanent heat-conducting oil as the medium, dissipates heat
through the heat sink, and uses air circulation to increase the room temperature.
◆ The electric heating oil heater has the characteristics of convenient use, safety, beauti-
ful appearance, quiet operation and no electromagnetic interference. It is suitable for
scientific research, hospitals, hotels, exercise rooms, bedrooms and other places. It makes
your room or office more warm and comfortable in the cold season.
Product Structure
1. Control Box
4. Button
7. Body
INSTRUCTIONS FOR USE
INSTALLATION METHOD:
(1)Remove the heater and all parts from the packaging box.
(2)Turn the heater upside down, position the castor board between the end fins. Attach
them to the U-bolts on the heater and tighten using the wing nuts provided., shown in
Figure 2;
(3)Turn heater right-side up.
INSTRUCTIONS
Figure1 Product Structure
2. Control Panel
5. ON-OFF Switch
8. U Screw
2
3. Display panel
6. Cord Storage
9. Castor
Advertisement
Table of Contents
Need help?
Do you have a question about the 820-276 and is the answer not in the manual?
Questions and answers
Hi, the appointment/timer section of the manual makes zero sense. Please clearly explain how to set the heater to come on at a specific time and how to turn off. Be very specific about which button to press first, what comes next and which button to finish etc. A video would be helpful.
Press the reservation (or timer) button to enter the time setting mode. The reservation lamp (or timer lamp) will flash. Adjust the time using the add and subtract keys. The setting will automatically confirm after 5 seconds of no operation or can be confirmed immediately by pressing the reservation (or timer) button again. The reservation lamp (or timing lamp) will stay on continuously after confirmation. You can set both scheduled power-on and power-off times, with the first confirmed setting taking priority. The maximum timer setting is 24 hours, and setting it to 0 hours disables the timer.
This answer is automatically generated