General Devices - Nokia 6600 slide Service Manual

RM-414; RM-570
Service information differences between RM-570 and
RM-414

General devices

The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-414; RM-570. For the correct use of the service devices, and the best effort of workbench
setup, please refer to various concepts.
Issue 2
MJ-183
MJ-183 is meant for component level troubleshooting.
The jig includes an RF interface for GSM, WCDMA and Bluetooth. In
addition, it has the following features:
• Provides mechanical interface with the engine module
• Provides galvanic connection to all needed test pads in module
• Multiplexing between USB and FBUS media, controlled by Vusb
• MMC interface
• Duplicated SIM connector
• Connector for control unit
• Access for AV- and USB connectors
SS-209
The camera removal tool SS-209 is used to remove/attach a camera
module from/to the camera socket.
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
Module jig
Camera removal tool
Page 6 –7