Nokia 6600 slide Service Manual page 33

RM-414; RM-570
Service Devices and Service Concepts
Issue 2
RJ-166
RJ-166 is a jig used when servicing the accelerometer (N2501).
It is used together with the ST-53 stencil.
RJ-201
RJ-201 is a rework jig used when servicing the GSM 850/900 TX filter
(Z7503) component.
This jig is used together with the ST-65 stencil.
RJ-73
RJ-73 is a rework jig used when servicing the N3305 component. It is
used together with the ST-29 rework stencil.
RJ-93
RJ-93 is used as a rework jig for the Front End Module (FEM).
This rework jig takes the FEM or power amplifier (PA) module (N7520)
for spreading the soldering paste to the component. Must be used
together with the ST-40 stencil.
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
Rework jig
Rework jig
Rework jig
Rework jig
Page 2 –11