Front Handle Installation - Shindaiwa X7502824900 Owner's/Operator's Manual

Front handle installation

Label shows minimum spacing for front handle location.
1. Position front handle for comfortable operation and secure screws.
Adjust throttle lever free play
The throttle lever free play should be approximately 4 - 6 mm (3/16" -
1/4"). Make sure that the throttle lever operates smoothly without binding.
If it becomes necessary to adjust the lever free play, follow the procedures
and illustrations that follow.
1. Loosen the air cleaner cover knob(s) and remove the air cleaner cover.
2. Loosen the lock nut on the cable adjuster. Turn the cable adjuster in or
out as required to obtain proper free play 4 - 6 mm.
3. Tighten the locknut.
4. Reinstall the air cleaner cover.
8
NOTE
Throttle lever free play
Remove air cleaner cover
Cable
Adjuster
4-6 mm
(3/16"-1/4")
Throttle Free Play