Inateck BCST-71 User Manual page 21

Transfer EAN-13 to ISSN
Enable EAN-2
Enable EAN-5
To recharge the BCST-71 barcode scanner
When the scanner is low in battery, the yellow indicator flashes. To recharge the
barcode scanner, please use the USB cable included, and connect the barcode scanner
to the USB port of a working computer or a 5V charger. When the barcode scanner is
being recharged, the red LED indicator is on. It goes off when the barcode scanner is fully
recharged.
（*）Do not transfer EAN-13 to ISSN
（*）Disable EAN-2
（*）Disable EAN-5
EN
19