Starting The Wash Programme - AEG KO-LAVAMAT 88840 User Information

If using liquid detergents/tablets:
3
Add liquid detergent or tablets in the quantity recommended by the
washing detergent manufacturer. Add liquid detergent with the dosage
container provided by the detergent manufacturer.

Starting the wash programme

1. Check that the water tap is open.
0
2. Start the washing programme: press the START/PAUSE
button.
The washing programme is started or starts at the end of
the time delay set.
If the DOOR/LIGHT display flashes red when the START/PAUSE button
3
is pressed, the door is not closed properly. Push the door firmly closed,
ensuring that there are no fabrics caught in the door and press the
START/PAUSE button again.
If the Delay Timer is set:
The time delay set begins to elapse and the time remaining until the
programme is due to start (in hours) is indicated on the Multi-display.
During this time, you can add more washing or change or cancel the
time delay.
• To add more washing, press the START/PAUSE button: the door can
then be opened. Then close the door and press the START/PAUSE
button again.
• To change or cancel the time delay, press the DELAY TIMER button re-
peatedly until the desired time is indicated on the display; when
the running time of the programme is displayed (in minutes, for ex-
ample,120) the washing programme begins immediately.
While the time delay is running, the washing machine goes into Stand-
3
by mode. Only WASH TIME remains lit and the Multi-display shows the
time remaining until the programme starts. All other indicators on the
control panel go off in order to save energy. You can press any button
to cancel the Stand-by mode.
Operating Instructions
25