AEG KO-LAVAMAT 88840 User Information page 34

Operating Instructions
Problem
The washing machine
vibrates when operat-
ing or is noisy.
Excessive foaming dur-
ing the main wash.
Water leaks out of the
washing machine.
34
Possible Cause
The transit packaging has not
been removed.
The machine is not level.
There is very little washing in
the drum (for example, one
dressing gown).
Water could not be fully
drained out before spinning,
because the
drain hose is kinked or the
water pump is blocked.
Probably too much detergent
has been used.
The screw connection on the
inlet hose is leaking.
The drainage hose is leaking.
The drain pump cover is not
correctly closed.
Washing is caught in the
door.
The emergency emptying
hose is not correctly closed
or is leaking.
Remedy
Remove the transit packag-
ing as described in the In-
stallation and Connection
instructions.
Adjust the feet according to
the Installation and Connec-
tion instructions.
This does not affect the op-
eration of the machine.
Check the drain hose and re-
move any kink if necessary or
clean the water pump and if
necessary remove foreign
bodies from the pump hous-
ing.
It may be necessary to re-
duce the amount of deter-
gent used. Follow the
manufacturer's recommen-
dations.
Tighten the inlet hose screw
connection.
Check the drainage hose and
replace if necessary.
Close the cover correctly.
Stop the programme and re-
move the washing caught in
the door. Restart the pro-
gramme.
Close the emergency empty-
ing hose (see Section "Carry
out emergency emptying").
Call your local Service Force
Centre, if the emergency
emptying hose is leaking.